Autel MaxiBAS BT608 Professional Analysis Tool for Testing Batteries (BT508/BT506 Upgraded)
Autel MaxiBAS BT608
The BT608 is a touchscreen Battery & Electrical System analyzer that applies Adaptive Conductance, an advanced battery analysis method that produces a more accurate examination of the battery’s cold-cranking ability and reserve capacity, vital to determining a battery’s true health.
Top 6 Reasons to Buy Autel MaxiBAS BT608
- Accurate Battery Diagnosis - Professional Analysis tool for Testing 6- and 12-volt Batteries from 100-3000 CCA, it covers Flooded, AGM, AGM Spiral, EFB and GEL Cell batteries, and is highly compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA battery standards.
- Also an All Systems Diagnostic Tool - Not Only a Professional Battery Tester, But Also an Ideal Wireless FULL SYSTEMS Scanner, It has the same vehicle/year coverage as Autel MX808/ MK808/ MK808BT.
- Worldwide Vehicle Coverage - Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
- Intuitive Adaptive Conductance - Autel BT608 utilizes Adaptive Conductance, As an advanced battery analysis technology for more accurate examination of the battery's cold-cranking ability and reserve capacity.
- Bluetooth Connection - With a wider range of use and a more stable connection
- Lift Free Update
What Can Autel BT608E Do For You?
In-Vehicle Test
- SOH(State Of Health)
SOH, generally including battery capacity and start-up capability, is an important factor to measure whether the battery needs to be replaced.
- SOC(State Of Charge)
The battery's state of charge is similar to how much power is left in a phone. When the SOC value is too high or too low for long-term use, the battery life will be shortened.
- CCA(Cold Cranking Amps)
When the CCA capacity decreases, it may cause the vehicle to fail to start normally. It is also an important indicator to decide whether the battery needs to be replaced.
Out-Vehicle Test
BT608 can test the health of a battery when it’s not installed in the vehicle, just input the correct battery specifications based on the information printed on the battery’s label, verify battery type, battery standard and battery capacity.
Even when a battery is in a poor state of charge, it can accurately test its potential for stored energy without necessitating a recharge prior to test. This can expedite diagnosis and more quickly achieve the sales of a replacement unit.
One-Touch Battery Replacement/Registration with Illustration Guides
BT608 can perform battery registration/replacement at a single touch of the screen. It offers illustration guides to show the whole battery replacement process.
After registration of the new battery, it can perform vehicle systems initialization to reset the components.
Re-Initialize Vehicle Systems to Make Them Work Properly Again
All System Diagnostics
Autel MaxiBAS BT608 offers the technician everything required to service a vehicle’s starting and charging system including SoC and State of Health (SoH) battery testing and vehicle-specific battery replacement instructions and battery registration. The tool also enables Starter and Alternator testing, and the optional Amp Clamp and Multimeter enable even more thorough electrical systems diagnostics.
Easy Customized Report Sharing via Built-In Thermal Printer
BT608 allows DIYers and technicians to print reports immediately after performing a test or later, all reports are saved in Data Manager.
- Built-in printer (kit includes 2 rolls of paper)
- WIFI printing via the Autel PC MaxiSuite desktop app
- Customizable: Report title, shop information, technician name
Autel MaxiBAS BT608E Adaptive Conductance Technology
BT608 uses Adaptive Conductance to gauge a battery’s conductance health. A low-frequency alternating current is sent through the battery to determine its remaining plate area. As the battery degrades, the plates degrade, as does its capacity and its conductance. Besides its consistent results, this method’s advantage over typical load testers is its ability to allow multiple tests without draining the battery and to test batteries that are low or nearly completely discharged. This BT608 similarly uses Adaptive Conductance to test the battery’s partnering components, the alternator and starter to see if they can take and store a charge.
Autel MaxiBAS BT608E Vehicle Coverage:
Support Wide Vehicle Coverage: Chrysler, Dodge, GM, JEEP, FORD, Abarth, Alfa, Audi, Bentley, Sprinter, Bugatti, Citroen, Dacia, Fiat, Ford(EU), Jaguar, Lamborghini, Lancia, LandRover, LT3, Maybach, MINI, Opel, Porsche, Renault, Saab, Seat, Skoda, Smart, Vauxhall, Volvo, VW CV, Toyota, Benz, BMW, VW, Peugeot, Acura, Daewoo, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR Scion, Subaru, Suzuki
Autel MaxiBAS BT608E Specifications:
| Recommended Use: | Indoor | |||
| Operating System: | Android 9.0 | |||
| Connectivity |
|
|||
| Memory: | 64GB | |||
| Display: | 5.5'' LCD touch screen with 720*1280 resolution |
|||
| Camera |
8 Megapixel |
|||
| Input Voltage | Light sensor for brightness auto changing | |||
| Working Current | Input: N/A, Output: buzzer | |||
| Internal Battery | 3.7 V/5000 mAh lithium-polymer battery Charges via 5 VDC power supply |
|||
| CCA Range | Around 7 hours of continuous use | |||
| Voltage Range |
5V/1.5A | |||
| Power Consumption: | 600 mA(LCD on with default brightness, Wi-Fi on)@3.7 V | |||
| Operating Temp.: | 0 to 55°C(32 to 131°F) | |||
| Storage Temp.: | -20 to 60°C (-4 to 140°F) | |||
| Operating Humidity: | 5%-95%non-condensing | |||
| Dimensions (W x H x D): | 204 mm (8.03”) x 90 mm (3.54”) x 32 mm (1.25”) | |||
| Net Weight | 510 g (1.12 lb.) |
Autel MaxiBAS BT608E Package List:
- 1 x MaxiBAS BT608 Main Unit
- 1 x MaxiVCI V200 Series
- 1 x Battery Clamp Cable
- 2 x Paper Roll
- 1 x Power Adapter
- 1 x USB Cable
- 2 x Battery Side Post Terminal TYPE T
- 2 x Battery Side Post Terminal TYPE S
Certificate
www.diagmart.com is Autel Authorized Online Agent. Products Created by Autel ® Innovation & Quality You Can Trust.
Autel MaxiBAS BT608
The BT608 is a touchscreen Battery & Electrical System analyzer that applies Adaptive Conductance, an advanced battery analysis method that produces a more accurate examination of the battery’s cold-cranking ability and reserve capacity, vital to determining a battery’s true health.
Top 6 Reasons to Buy Autel MaxiBAS BT608
- Accurate Battery Diagnosis - Professional Analysis tool for Testing 6- and 12-volt Batteries from 100-3000 CCA, it covers Flooded, AGM, AGM Spiral, EFB and GEL Cell batteries, and is highly compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA battery standards.
- Also an All Systems Diagnostic Tool - Not Only a Professional Battery Tester, But Also an Ideal Wireless FULL SYSTEMS Scanner, It has the same vehicle/year coverage as Autel MX808/ MK808/ MK808BT.
- Worldwide Vehicle Coverage - Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
- Intuitive Adaptive Conductance - Autel BT608 utilizes Adaptive Conductance, As an advanced battery analysis technology for more accurate examination of the battery's cold-cranking ability and reserve capacity.
- Bluetooth Connection - With a wider range of use and a more stable connection
- Lift Free Update
What Can Autel BT608E Do For You?
In-Vehicle Test
- SOH(State Of Health)
SOH, generally including battery capacity and start-up capability, is an important factor to measure whether the battery needs to be replaced.
- SOC(State Of Charge)
The battery's state of charge is similar to how much power is left in a phone. When the SOC value is too high or too low for long-term use, the battery life will be shortened.
- CCA(Cold Cranking Amps)
When the CCA capacity decreases, it may cause the vehicle to fail to start normally. It is also an important indicator to decide whether the battery needs to be replaced.
Out-Vehicle Test
BT608 can test the health of a battery when it’s not installed in the vehicle, just input the correct battery specifications based on the information printed on the battery’s label, verify battery type, battery standard and battery capacity.
Even when a battery is in a poor state of charge, it can accurately test its potential for stored energy without necessitating a recharge prior to test. This can expedite diagnosis and more quickly achieve the sales of a replacement unit.
One-Touch Battery Replacement/Registration with Illustration Guides
BT608 can perform battery registration/replacement at a single touch of the screen. It offers illustration guides to show the whole battery replacement process.
After registration of the new battery, it can perform vehicle systems initialization to reset the components.
Re-Initialize Vehicle Systems to Make Them Work Properly Again
All System Diagnostics
Autel MaxiBAS BT608 offers the technician everything required to service a vehicle’s starting and charging system including SoC and State of Health (SoH) battery testing and vehicle-specific battery replacement instructions and battery registration. The tool also enables Starter and Alternator testing, and the optional Amp Clamp and Multimeter enable even more thorough electrical systems diagnostics.
Easy Customized Report Sharing via Built-In Thermal Printer
BT608 allows DIYers and technicians to print reports immediately after performing a test or later, all reports are saved in Data Manager.
- Built-in printer (kit includes 2 rolls of paper)
- WIFI printing via the Autel PC MaxiSuite desktop app
- Customizable: Report title, shop information, technician name
Autel MaxiBAS BT608E Adaptive Conductance Technology
BT608 uses Adaptive Conductance to gauge a battery’s conductance health. A low-frequency alternating current is sent through the battery to determine its remaining plate area. As the battery degrades, the plates degrade, as does its capacity and its conductance. Besides its consistent results, this method’s advantage over typical load testers is its ability to allow multiple tests without draining the battery and to test batteries that are low or nearly completely discharged. This BT608 similarly uses Adaptive Conductance to test the battery’s partnering components, the alternator and starter to see if they can take and store a charge.
Autel MaxiBAS BT608E Vehicle Coverage:
Support Wide Vehicle Coverage: Chrysler, Dodge, GM, JEEP, FORD, Abarth, Alfa, Audi, Bentley, Sprinter, Bugatti, Citroen, Dacia, Fiat, Ford(EU), Jaguar, Lamborghini, Lancia, LandRover, LT3, Maybach, MINI, Opel, Porsche, Renault, Saab, Seat, Skoda, Smart, Vauxhall, Volvo, VW CV, Toyota, Benz, BMW, VW, Peugeot, Acura, Daewoo, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR Scion, Subaru, Suzuki
Autel MaxiBAS BT608E Specifications:
| Recommended Use: | Indoor | |||
| Operating System: | Android 9.0 | |||
| Connectivity |
|
|||
| Memory: | 64GB | |||
| Display: | 5.5'' LCD touch screen with 720*1280 resolution |
|||
| Camera |
8 Megapixel |
|||
| Input Voltage | Light sensor for brightness auto changing | |||
| Working Current | Input: N/A, Output: buzzer | |||
| Internal Battery | 3.7 V/5000 mAh lithium-polymer battery Charges via 5 VDC power supply |
|||
| CCA Range | Around 7 hours of continuous use | |||
| Voltage Range |
5V/1.5A | |||
| Power Consumption: | 600 mA(LCD on with default brightness, Wi-Fi on)@3.7 V | |||
| Operating Temp.: | 0 to 55°C(32 to 131°F) | |||
| Storage Temp.: | -20 to 60°C (-4 to 140°F) | |||
| Operating Humidity: | 5%-95%non-condensing | |||
| Dimensions (W x H x D): | 204 mm (8.03”) x 90 mm (3.54”) x 32 mm (1.25”) | |||
| Net Weight | 510 g (1.12 lb.) |
Autel MaxiBAS BT608E Package List:
- 1 x MaxiBAS BT608 Main Unit
- 1 x MaxiVCI V200 Series
- 1 x Battery Clamp Cable
- 2 x Paper Roll
- 1 x Power Adapter
- 1 x USB Cable
- 2 x Battery Side Post Terminal TYPE T
- 2 x Battery Side Post Terminal TYPE S
Certificate
www.diagmart.com is Autel Authorized Online Agent. Products Created by Autel ® Innovation & Quality You Can Trust.
Original: $499.00
-70%$499.00
$149.70Description
Autel MaxiBAS BT608
The BT608 is a touchscreen Battery & Electrical System analyzer that applies Adaptive Conductance, an advanced battery analysis method that produces a more accurate examination of the battery’s cold-cranking ability and reserve capacity, vital to determining a battery’s true health.
Top 6 Reasons to Buy Autel MaxiBAS BT608
- Accurate Battery Diagnosis - Professional Analysis tool for Testing 6- and 12-volt Batteries from 100-3000 CCA, it covers Flooded, AGM, AGM Spiral, EFB and GEL Cell batteries, and is highly compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA battery standards.
- Also an All Systems Diagnostic Tool - Not Only a Professional Battery Tester, But Also an Ideal Wireless FULL SYSTEMS Scanner, It has the same vehicle/year coverage as Autel MX808/ MK808/ MK808BT.
- Worldwide Vehicle Coverage - Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
- Intuitive Adaptive Conductance - Autel BT608 utilizes Adaptive Conductance, As an advanced battery analysis technology for more accurate examination of the battery's cold-cranking ability and reserve capacity.
- Bluetooth Connection - With a wider range of use and a more stable connection
- Lift Free Update
What Can Autel BT608E Do For You?
In-Vehicle Test
- SOH(State Of Health)
SOH, generally including battery capacity and start-up capability, is an important factor to measure whether the battery needs to be replaced.
- SOC(State Of Charge)
The battery's state of charge is similar to how much power is left in a phone. When the SOC value is too high or too low for long-term use, the battery life will be shortened.
- CCA(Cold Cranking Amps)
When the CCA capacity decreases, it may cause the vehicle to fail to start normally. It is also an important indicator to decide whether the battery needs to be replaced.
Out-Vehicle Test
BT608 can test the health of a battery when it’s not installed in the vehicle, just input the correct battery specifications based on the information printed on the battery’s label, verify battery type, battery standard and battery capacity.
Even when a battery is in a poor state of charge, it can accurately test its potential for stored energy without necessitating a recharge prior to test. This can expedite diagnosis and more quickly achieve the sales of a replacement unit.
One-Touch Battery Replacement/Registration with Illustration Guides
BT608 can perform battery registration/replacement at a single touch of the screen. It offers illustration guides to show the whole battery replacement process.
After registration of the new battery, it can perform vehicle systems initialization to reset the components.
Re-Initialize Vehicle Systems to Make Them Work Properly Again
All System Diagnostics
Autel MaxiBAS BT608 offers the technician everything required to service a vehicle’s starting and charging system including SoC and State of Health (SoH) battery testing and vehicle-specific battery replacement instructions and battery registration. The tool also enables Starter and Alternator testing, and the optional Amp Clamp and Multimeter enable even more thorough electrical systems diagnostics.
Easy Customized Report Sharing via Built-In Thermal Printer
BT608 allows DIYers and technicians to print reports immediately after performing a test or later, all reports are saved in Data Manager.
- Built-in printer (kit includes 2 rolls of paper)
- WIFI printing via the Autel PC MaxiSuite desktop app
- Customizable: Report title, shop information, technician name
Autel MaxiBAS BT608E Adaptive Conductance Technology
BT608 uses Adaptive Conductance to gauge a battery’s conductance health. A low-frequency alternating current is sent through the battery to determine its remaining plate area. As the battery degrades, the plates degrade, as does its capacity and its conductance. Besides its consistent results, this method’s advantage over typical load testers is its ability to allow multiple tests without draining the battery and to test batteries that are low or nearly completely discharged. This BT608 similarly uses Adaptive Conductance to test the battery’s partnering components, the alternator and starter to see if they can take and store a charge.
Autel MaxiBAS BT608E Vehicle Coverage:
Support Wide Vehicle Coverage: Chrysler, Dodge, GM, JEEP, FORD, Abarth, Alfa, Audi, Bentley, Sprinter, Bugatti, Citroen, Dacia, Fiat, Ford(EU), Jaguar, Lamborghini, Lancia, LandRover, LT3, Maybach, MINI, Opel, Porsche, Renault, Saab, Seat, Skoda, Smart, Vauxhall, Volvo, VW CV, Toyota, Benz, BMW, VW, Peugeot, Acura, Daewoo, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR Scion, Subaru, Suzuki
Autel MaxiBAS BT608E Specifications:
| Recommended Use: | Indoor | |||
| Operating System: | Android 9.0 | |||
| Connectivity |
|
|||
| Memory: | 64GB | |||
| Display: | 5.5'' LCD touch screen with 720*1280 resolution |
|||
| Camera |
8 Megapixel |
|||
| Input Voltage | Light sensor for brightness auto changing | |||
| Working Current | Input: N/A, Output: buzzer | |||
| Internal Battery | 3.7 V/5000 mAh lithium-polymer battery Charges via 5 VDC power supply |
|||
| CCA Range | Around 7 hours of continuous use | |||
| Voltage Range |
5V/1.5A | |||
| Power Consumption: | 600 mA(LCD on with default brightness, Wi-Fi on)@3.7 V | |||
| Operating Temp.: | 0 to 55°C(32 to 131°F) | |||
| Storage Temp.: | -20 to 60°C (-4 to 140°F) | |||
| Operating Humidity: | 5%-95%non-condensing | |||
| Dimensions (W x H x D): | 204 mm (8.03”) x 90 mm (3.54”) x 32 mm (1.25”) | |||
| Net Weight | 510 g (1.12 lb.) |
Autel MaxiBAS BT608E Package List:
- 1 x MaxiBAS BT608 Main Unit
- 1 x MaxiVCI V200 Series
- 1 x Battery Clamp Cable
- 2 x Paper Roll
- 1 x Power Adapter
- 1 x USB Cable
- 2 x Battery Side Post Terminal TYPE T
- 2 x Battery Side Post Terminal TYPE S
Certificate
www.diagmart.com is Autel Authorized Online Agent. Products Created by Autel ® Innovation & Quality You Can Trust.
